About Spherical Washers Conical Seats DIN 6319
Material
Conical seat : Case-hardened steel, case-hardened, manganese phosphate treated. Heat-treated steel, tempered, manganese phosphated
Spherical washer :
- Case-hardened steel, case-hardened, manganese phosphate treated
Assembly
- Conical seats form D are to be used only for plain, closed round areas.
- For larger holes only use form G
Specification :
| Dimensions | For pin
d 6 | For screws
d 6 | Load capacity for static load
max. | Torque for screwed connections
max. |
| Art.-No. |
| d 1
H13 | d 2
H13 | d 3 | d 4 | d 5 | h 1 | h 2 | h 3 | H 4 | r 1 |
| with conical seat form D
~ | with conical seat form G
~ |
| [mm] | [mm] | [mm] | [kN] | [Nm] | [g] |
| Spherical Washers From Case-Hardened Steel, Form C - Picture1 |
| 6,4 | - | 12 | - | - | 0,7 | 2,3 | - | 4,2 | 5,4 | 9,0 | 6 | M6 | 9 | 10 1) | 1,0 | 23050.0006 |
| 8,4 | - | 17 | - | - | 0,6 | 3,2 | - | 5,6 | 7,1 | 12,0 | 8 | M8 | 17 | 25 1) | 2,8 | 23050.0008 |
| 10,5 | - | 21 | - | - | 0,8 | 4,0 | - | 6,5 | 7,3 | 15,0 | 10 | M10 | 26 | 46 1) | 5,3 | 23050.0010 |
| 13,0 | - | 24 | - | - | 1,1 | 4,6 | - | 8,0 | 9,0 | 17,0 | 12 | M12 | 38 | 82 1) | 7,6 | 23050.0012 |
| 15,0 | - | 28 | - | - | 1,4 | 5,0 | - | 8,5 | 9,5 | 22,0 | 14 | M14 | 53 | 130 1) | 12,0 | 23050.0014 |
| 17,0 | - | 30 | - | - | 1,3 | 5,3 | - | 9,6 | 10,4 | 22,0 | 16 | M16 | 73 | 206 1) | 13,0 | 23050.0016 |
| 21,0 | - | 36 | - | - | 2,0 | 6,3 | - | 11,7 | 12,2 | 27,0 | 20 | M20 | 117 | 407 1) | 23,0 | 23050.0020 |
| 23,0 | - | 40 | - | - | 2,5 | 7,6 | - | 13,5 | - | 29,5 | 22 | M22 | 146 | 542 1) | 34,0 | 23050.0022 2) |
| 25,0 | - | 44 | - | - | 2,4 | 8,2 | - | 15,2 | 15,7 | 32,0 | 24 | M24 | 168 | 698 1) | 45,0 | 23050.0024 |
| 28,0 | - | 50 | - | - | 3,3 | 10,2 | - | 17,0 | - | 36,0 | 27 | M27 | 221 | 1021 1) | 74,0 | 23050.0027 2) |
| 31,0 | - | 56 | - | - | 3,6 | 11,2 | - | 19,2 | 19,7 | 41,0 | 30 | M30 | 269 | 1355 1) | 101,0 | 23050.0030 |
| 34,0 | - | 62 | - | - | 4,4 | 13,0 | - | 21,8 | - | 45,0 | 33 | M33 | 326 3) | 1969 3) 1) | 150,0 | 23050.0033 2) |
| 37,0 | - | 68 | - | - | 4,6 | 14,0 | - | 23,5 | - | 50,0 | 36 | M36 | 394 | 2372 1) | 190,0 | 23050.0036 |
| 40,0 | - | 75 | - | - | 5,6 | 16,0 | - | 26,8 | - | 54,0 | 39 | M39 | 460 3) | 3276 3) 1) | 218,0 | 23050.0039 2) |
| 43,0 | - | 78 | - | - | 6,5 | 17,0 | - | 29,0 | - | 58,0 | 42 | M42 | 542 | 3802 1) | 310,0 | 23050.0042 |
| 50,0 | - | 92 | - | - | 8,0 | 21,0 | - | 35,5 | - | 67,0 | 48 | M48 | 714 | 5730 1) | 540,0 | 23050.0048 |
| 54,0 | - | 96 | - | - | 9,3 | 22,0 | - | 38,3 | - | 72,0 | 52 | M52 | 832 3) | 7876 3) 1) | 620,0 | 23050.0052 2) |
| 58,0 | - | 103 | - | - | 9,8 | 23,0 | - | 39,3 | - | 79,0 | 56 | M56 | 960 3) | 9793 3) 1) | 760,0 | 23050.0056 2) |
| 62,0 | - | 112 | - | - | 11,0 | 25,0 | - | 43,6 | - | 86,0 | 60 | M60 | 1122 3) | 12219 3) 1) | 990,0 | 23050.0060 2) |
| 66,0 | - | 120 | - | - | 12,0 | 27,0 | - | 46,6 | - | 93,0 | 64 | M64 | 1269 3) | 14762 3) 1) | 1220,0 | 23050.0064 2) |
| Conical Seats From Case-Hardened Steel, Form D - Picture2 |
| - | 7,1 | - | 12 | 11,0 | - | - | 2,8 | - | - | - | 6 | M6 | 9 | 10 1) | 1,4 | 23050.0106 |
| - | 9,6 | - | 17 | 14,5 | - | - | 3,5 | - | - | - | 8 | M8 | 17 | 25 1) | 3,7 | 23050.0108 |
| - | 12,0 | - | 21 | 18,5 | - | - | 4,2 | - | - | - | 10 | M10 | 26 | 46 1) | 6,5 | 23050.0110 |
| - | 14,2 | - | 24 | 20,0 | - | - | 5,0 | - | - | - | 12 | M12 | 38 | 82 1) | 10,0 | 23050.0112 |
| - | 16,5 | - | 28 | 24,8 | - | - | 5,6 | - | - | - | 14 | M14 | 53 | 130 1) | 15,0 | 23050.0114 |
| - | 19,0 | - | 30 | 26,0 | - | - | 6,2 | - | - | - | 16 | M16 | 73 | 206 1) | 18,0 | 23050.0116 |
| - | 23,2 | - | 36 | 31,0 | - | - | 7,5 | - | - | - | 20 | M20 | 117 | 407 1) | 30,0 | 23050.0120 |
| - | 26,0 | - | 40 | 34,0 | - | - | 8,5 | - | - | - | 22 | M22 | 146 | 542 1) | 44,0 | 23050.0122 2) |
| - | 28,0 | - | 44 | 37,0 | - | - | 9,5 | - | - | - | 24 | M24 | 168 | 698 1) | 61,0 | 23050.0124 |
| - | 31,5 | - | 50 | 43,0 | - | - | 10,5 | - | - | - | 27 | M27 | 221 | 1021 1) | 90,0 | 23050.0127 2) |
| - | 35,0 | - | 56 | 49,0 | - | - | 12,0 | - | - | - | 30 | M30 | 269 | 1355 1) | 124,0 | 23050.0130 |
| - | 38,5 | - | 62 | 55,0 | - | - | 14,0 | - | - | - | 33 | M33 | 326 3) | 1969 3) 1) | 180,0 | 23050.0133 2) |
| - | 42,0 | - | 68 | 60,0 | - | - | 15,0 | - | - | - | 36 | M36 | 394 | 2372 1) | 230,0 | 23050.0136 |
| - | 45,0 | - | 75 | 67,0 | - | - | 17,0 | - | - | - | 39 | M39 | 460 3) | 3276 3) 1) | 339,0 | 23050.0139 2) |
| - | 49,0 | - | 78 | 70,0 | - | - | 18,0 | - | - | - | 42 | M42 | 542 | 3802 1) | 360,0 | 23050.0142 |
| - | 56,0 | - | 92 | 82,0 | - | - | 22,0 | - | - | - | 48 | M48 | 714 | 5730 1) | 640,0 | 23050.0148 |
| - | 60,0 | - | 96 | 85,0 | - | - | 24,0 | - | - | - | 52 | M52 | 832 3) | 7876 3) 1) | 740,0 | 23050.0152 2) |
| - | 65,0 | - | 103 | 93,0 | - | - | 25,0 | - | - | - | 56 | M56 | 960 3) | 9793 3) 1) | 900,0 | 23050.0156 2) |
| - | 70,0 | - | 112 | 102,0 | - | - | 28,0 | - | - | - | 60 | M60 | 1122 3) | 12219 3) 1) | 1165,0 | 23050.0160 2) |
| - | 75,0 | - | 120 | 110,0 | - | - | 30,0 | - | - | - | 64 | M64 | 1269 3) | 14762 3) 1) | 1430,0 | 23050.0164 2) |
| Conical Seats From Heat-Treated Steel, Form G - Picture3 |
| - | 7,1 | - | 17 | 11,0 | - | - | 4,0 | - | - | - | 6 | M6 | 9 | 10 1) | 5,6 | 23050.0206 |
| - | 9,6 | - | 24 | 14,5 | - | - | 5,0 | - | - | - | 8 | M8 | 17 | 25 1) | 14,0 | 23050.0208 |
| - | 12,0 | - | 30 | 18,5 | - | - | 5,0 | - | - | - | 10 | M10 | 26 | 46 1) | 22,0 | 23050.0210 |
| - | 14,2 | - | 36 | 20,0 | - | - | 6,0 | - | - | - | 12 | M12 | 38 | 82 1) | 39,0 | 23050.0212 |
| - | 16,5 | - | 40 | 24,8 | - | - | 6,0 | - | - | - | 14 | M14 | 53 | 130 1) | 47,0 | 23050.0214 |
| - | 19,0 | - | 44 | 26,0 | - | - | 7,0 | - | - | - | 16 | M16 | 73 | 206 1) | 65,0 | 23050.0216 |
| - | 23,2 | - | 50 | 31,0 | - | - | 8,0 | - | - | - | 20 | M20 | 117 | 407 1) | 93,0 | 23050.0220 |
| - | 28,0 | - | 60 | 37,0 | - | - | 10,0 | - | - | - | 24 | M24 | 168 | 698 1) | 165,0 | 23050.0224 |
| - | 35,0 | - | 68 | 49,0 | - | - | 12,0 | - | - | - | 30 | M30 | 269 | 1355 1) | 235,0 | 23050.0230 |
1) Torques of screws 8.8, eventual pre-loads to be considered, coefficient of friction total 0,14.
2) DIN standards do not include these dimensions.
Get Latest Price
Send Inquiry
